Turbofan Engine Teardown Simulator
By @0xCortexq. Made with Claude Opus 5.5. Watch the original post.
Remake prompt (written by Lumpong Automated)
Make a 25-second landscape 16:9 (1280x720) teardown film of a high-bypass turbofan, every part built in Three.js code (no models). Shown slowed. Build: a 22-blade swept fan, 3 booster stages, 10 compressor stages, a combustor with 18 fuel nozzles and 2 + 5 turbine stages, on two spools that spin at their own speeds. Polished silver metal on a light grey-white studio background with a soft floor shadow. UI: white cards with thin borders, red and blue accents, monospace labels. Top-left 'TF-1 - Turbofan High-Bypass' with '2 SPOOLS - 1+3+10 COMP - 2+5 TURB'. Legend across the top: bypass air blue, compressed purple, combustion orange, hot gas red. Left: SPOOL SPEED rings for N1 and N2, THRUST bar, and a donut 'WHERE THE AIR GOES' with BYPASS ~91% and CORE ~9% (10:1). Right: a GAS PATH chart that follows the camera (about 40 bar after the compressor, about 1,600 C in the combustor), AT CAMERA readout, STAGES bars. Bottom buttons: SPOOL UP, CUT AWAY, AIRFLOW, TEARDOWN, REASSEMBLE. Timeline: spool up from the front, at 0:04 a quarter of the engine slices away and 6,200 air particles show the split, at 0:13 the engine comes apart piece by piece, then snaps back and runs to full power.