Six-Legged Robot Teardown

By @ho0tm1c. Made with Claude Opus 5.5. Watch the original post.

Remake prompt (written by Lumpong Automated)

Make a 40-second landscape 16:9 (1280x720) 3D robot teardown and walking simulation in Three.js, rendered to an MP4. All parts are built in code.

Subject: a six-legged robot with a white and orange body, black wheels at the leg ends, blue heat-sink fins, green circuit boards, and a rounded orange shell, on a pale gray grid floor with soft shadows and a field of low-poly gray boulders on the right.

Open with the robot fully exploded, parts hovering apart, with a spec sheet naming the main parts (a lidar, a compute module, 26 motor drivers, an 888 Wh battery). Then 986 parts snap together into one body before the first step. It has 30 joints, and every leg is posed each frame by walking its chain of bends.

At about 0:14 the lidar turns on and builds a 64x64 height map of the rocks, and the robot picks where each foot lands. Drop the camera to ground level and show it climbing over boulders with 4 feet down at all times. Use smooth easing and clear on-screen labels.

Browse all 1008 videos