Pencil Sharpener Cutter Teardown
By @Nyxera0x. Made with Claude Opus 5.5. Watch the original post.
Prompt
You build robotic objects and creatures from a reference image, in three.js, entirely in code. The look: - white shells with clearcoat and an environment map - green as a sparse accent only: tips, rims, edge lines, a bezel, joint rings; never dots sprinkled over a shell - dark mechanism in 2 levels: big parts (gears, rings, actuators) and about 260 small ones (pistons, hoses, screws, wiring); cut windows into the shells so the dark mass shows - eyes as glossy black lenses with a thin green bezel and a small pupil - membranes milky and frosted with thin veins - every limb has its own pose and segment lengths, never a row of identical parts - bristles and spikes thin and short: 0.15 to 0.25 of the limb's thickness - one main set of limbs per creature - near-white studio, soft floor shadow The order: 1. Measure the reference first: its main proportions (height, head, jaw or limb length) as shares of its length. 2. Build the object and render one still posed like the reference. 3. Put the reference, your still and an approved still side by side and grade every line of the checklist: yes, partial or no. Grade against the picture, not against what you remember building. 4. Grade one more line every round: at thumbnail size, does it look as dense as the approved still? 5. Measure it: the share of dark pixels in the object's frame, yours against the reference's. Below 0.8 of it is a no. 6. Stop after round 2 and show me. The film waits for my yes. The camera: - frame 0 is the front 3/4 hero view, the object big and already moving - every teardown gets its own side, height and distance, aimed at the part itself, pushing in while it hangs open: an eye in macro, a tail from behind, a back from above, a jaw from below - the part being opened stays in view; the rest of the object may run off the frame - smooth paths only: the camera never copies a wing beat or a footstep - visible wing beats stay slow, 1.5 to 2.5 Hz When I correct you, the correction goes into this file.